Blood Bank Equipment

Product Details:

Rajas Platelet agitator specially designed to maintain, Platelets in continues motion at a fixed speed of 70 RPM. Maximum 36 standard Platelet bags can be accommodate at a time outer size 46x39x38 cms construction made of steel with heavy base duly powder coated paint finish, speed regulator on and off swith, rubber stamps to give a stablelity on floor, mesh made of stainless steel with stainless steel side support, 5 to 6 shelves provided to fill the blood platlets for agitation top easy to clean. DC motor for non stop trouble free working on the speed of 70 to 80 RPMs which give smooth movement to agitator.

Additional Information:

• Item Code: B-B-07
• Production Capacity: 30 Table Per Month
• Delivery Time: 2 weeks
• Packaging Details: Box Packing of each unit.

Customers can avail from us a wide range of blood collection monitors (item code: b. B-03) that are designed using latest technology. This compact machine ensures the anticoagulant and mixing of blood without harming blood cells during the process of collecting blood from the donor. Our designed monitors are available with numerous innovative features like pausing during the process of blood collection, easily set the volume to 1 ml increment, preset volume can be changed, gram and totaling of time during the process, an audio video alarm that indicates flawless flow and rings if the flow decreases to 15 ml or low and can also rings after accomplishment of the collection process. Furthermore, a micro controller program is installed into our system to ensure high accuracy and to stop the excess blood flow from the required volume; an auto tare facility motorized pinching system is also available in our machine.

 

Features:

 

• Trouble free operation
• Notification of end of the process
• High accuracy

Additional Information:

• Item Code: BB-03
• Minimum Order Quantity: 5 each

Rajas Blood Bag tube Sealer  equipment to seal the blood bag tube by high frequency dielectric heating system without causing haemolysis, leakage of blood. The sealing can be achieved in less than 1.5 seconds per tube by simple operation. Complete sealing of the blood bag tube is annexure by high frequency dielectric heating. Sealing of each tube takes approx 1.5 seconds and is thus very efficient. Pulling the sealing section to both sides can readily cut off sealed tube Input Voltage 230 V AC 230 V AC(12 V SMPS) Radio Frequency 40.68 MHZ 40.68 MHZ Sealing time Approx 1.5 sec. Approx 1.5 sec. Power Consumption 100 V A 100 V A Weight 4.4 Kg approx 5.4 Kg approx Size 170 x 210 x 110mm (WxDxH) 175 x 250 x 110mm (WxDxH) Battery Backup 150 sealing

Additional Information:

• Item Code: BB-04
• Minimum Order Quantity: 2 each

Our blood bank refrigerators are mounted on a sturdy angle frame the inner chamber is made of stainless steel and outer chamber made of M.S.duly powder coated paint the temperature is maintained with 4 degree to 6 degree for storing blood bottles or bags temp is controlled by Digital indicator cum controller and triggers the audio visual alarm in the event of fluction exceeding permitted tolerance unit is also fitted with door operated alarm. And Our blood bank refrigerators have power supply failure alarm as a safety device. Our blood bank refrigerators drawer are provided for holding the bags to work 220-230V and 50 to 60HZ the accuracy level of temperature is set even 0.5 degree or may be more precise, the blood bank refrigerated futted with data logger which is connected with your PC and with RS 232 port to maintain all the data on your PC for temperature record, this latest technique help to maintain the date on computer and avoid hassle to change the paper and pen in thermograph and then to keep thermograph paper records, we also offer many customize feature with our blood bank on the demand of our customer with additional cost.( thermograph is also available on request)

Features;

• Temperature is maintained with 4 degree to 6 degree Celsius
• Digital indicator cum controller for controlling the temperature
• Audio visual alarm in the event of fluctuation exceeding
• Tolerance unit is fitted with door operated alarm
• Power supply failure alarm
• Data logging facility for 100 readings
• Alpha numeric LCD Display
• Capacity: 50, 110, 200, 250 and 360 blood bags

 

Additional Information:

• Item Code: BB-01
• Minimum Order Quantity: 2 each

The Mobile Blood donor chair frame made of steel construction of heavy gauge with seat of high class washable fabric and high density foam inside the seat, provided with arm support head rest provided with the chair, fully and semi reclining position of the chair as per the desire of the user, arm support padded with cushioned material, seat surface divided in two or three parts suitable for the weight up to 250 kegs.Back up and down with electrical remote , foot side up and down with electric remote main seat up from keep side, arm rest moves with the position of Back side, this is chair cum bed over all size 24 inch x 66 inch seat size 20 inches, unit moves on wheel with heavy platform , all electrical operations with remote control which runs on main  or battery operation. Battery operation back up 6 to 8 hours after full charging of the battery, seat, back and up and down operation by remote control.

Additional Information:

• Item Code: BB-02
• Minimum Order Quantity: 2 each

Rajas Plasma Extractor is designed to extract blood component from centrifuged bags. The spring loaded front panel applies pressure on the collected bag causing the liquid to contain in transfer bag. Its sturdy construction makes it durable and reliable, easy to sue and portable. The unit is available in both versions automatic and manual. Sensor infra red, clamping control motor activated, pressure plate acrylic, alarm audio visual

Additional Information:

• Item Code: BB-05
• Minimum Order Quantity: 5 each

Rajas micro controller Based Cryoprecipitate freezer, inner chamber made of heavy gauge of stainless steel (304) outer body of mild steel heavy gauge duly powder coated paint finish, temp up to-20C -40C and -80C( as per requirments) with built in Micro controlled based temperature indicator cum controller having audio visual alarm for lo and high temprature. Heavy Duty Stainless Steel Basket. Display of Set and Process value temprature Extra-strength non CFC refrigeration System. With Danfoss Compressor. unit is supplied with tow option one is with data logger which allow to keep all the data in your PC and supported with compatiable software, another option is chart recorder. customer can choose any of the option as per choice The unit is mounted on Heavy duty Castor wheel (Lockable) for easy mobility. 120 mm thick CFC Free PUF (Poly Urethane Foam) Insulation to ensure temperature stability and save power consumption. Stainless Steel inner door with insulation. Double magnetic gasket in main door. Available in 80 & 135 Bags Capacity. Available in -20, -40 and -80 Degree.

Additional Information:

• Item Code: BB-10
• Minimum Order Quantity: 100 Piece

Refrigerated Centrifuge machine specially designed for High class Blood Bank set up with colour display screen Temp. Range (Working Temp. : 40C & 220C ± 10C) Capacity 6 NOS Blood Bags X 450 gm Power 220v, 50 hz, 15 amp Compressor Copeland ISI Mark, CFC Free perational Instructions for Touch Screen Panel 1 Ensure The Power Supply to The Unit Is 230V +/- 10 % 2 Turn on the Key Switch on the front and wait for 15 Sec 3 The system will Boot up & Show the Starting Menu 4 Starting Menu will give you the four options to Select 5 Select the desired Cycle by simply touching it on the Screen Don't Press Hard OR with Nails as it will damage the Screen 6 Keep The Screen away from Heat & Dust 7 Don't Clean it with Solvents or Detergents. 8 Clean it with only moist cotton cloth in power off condition Colour Touch screen Refrigerated Centrifuge Specifications Maximum rotor speed RPM 4000 Maximum centrifugal force G 5000 Temperature range OC 20C to 260C- at 4000 RPM Radius of centrifuging arm cm/inch 22/8.6 Recommended Voltage Stabilizer KVA 3KVA Single Phase Supply 220/230 V AC, 50 Hz Width mm 780 (approx Depth mm 890 (approx) Height mm 915 (approx) Weight Kg 275 (approx) Installation Take out the Centrifuge along with the accessories and other enclosures from the packed cases and remove all packing. After removing the compressor security clamp, install it in a room, which should be dust free as far as possible. The distance between the air outlet side of the unit and the wall should be at least 20 cms. Ensure the stability and leveling of the centrifuge for vibration free performance. For leveling the unit, mount it on the 4 leveling jacks provided. Connect the Centrifuge 3-pin power plug to a suitable 3-pin 230 volt AC power socket having proper EARTH connection. Use of good quality 5 KVA servo voltage stabilizer is a must so as to give proper 230 volt AC input to the centrifuge. Also ensure that the electric mains cable supply has adequate supply rating of 30 amps. This microprocessor based cooling centrifuge controls the temperature of the chamber along with the RPM of the rotor head having individual rotor number for a particular time period in minutes. The numeric keypad with the other function keys aid in the smooth setting of the different parameters. Rotors & Accessories The swing out rotor is made from MS casting and is dynamically balanced and functionally tested at speed higher than the rated speed. Refrigerating system The refrigerating system consists of the evaporator, which is coiled to the centrifuging chamber made of stainless steel. The refrigerator is mounted elastically on the right side of the casing of the centrifuge, which is controlled by the microprocessor based control panel. The desired temperature along with the respective program number is set on the digital display through the numeric keypad. If the centrifuge is to be operated at the stated lowest temperature, pre-cooling for about 30 min. of the rotor with the cups is recommended. This pre-cooling is possible since the refrigerating system can be operated independently without the motor.

Additional Information:

• Item Code: BB-11
• Minimum Order Quantity: 10 Piece

Rajas Plated Incubator provides an ideal strong environment for the Platelets. This unit designed to maintain a stable and inform temperature of 22.0°, the user friendly includes an acrylic inner door, and see through outer door, simple calibration is possible via the control panel. This, coupled with a visual and audible alarm system, enureses that your samples are both safe and secure, but also easy to access when you need them. Other features of this unit include Micro Controlled Temperature controller with Audio Visual Alarm for high & low temperature Display of set and process value. Extra - strength non CFC refrigeration system The unit is mounted on castor wheel for easy mobility CFC Free PUF (Poly Urethane Foam) Insulation to ensure temperature stability and save power consumption Optional Accessories 7 Days circular temperature Recorder Multi Channel Data logging system Internal size (WxDxH) 58x46x46cms and outer size is 75x78x105 cms ( unit is also available with Data logger facility for maintaining the date in your PC on request)

Additional Information:

• Item Code: BB-09
• Minimum Order Quantity: 2 each

Micro controller based Plasma Thawing Bath is a tabletop model, for quick thawing of plasma at 37.0 °C.Temperature is controlled by micro controller based temperature controller.Capacity15 bags Salient Features Audiovisual alarm if temperature deviates from preset temperature.Display of Set value & Process value Smooth acrylic tray for accommodating Plasma Bags Integrated pump for internal circulation maintains precise. temperature uniformity throughout the liquid medium.rounded corners for better water circulation and uniformity Foamed in place PUF insulation improves temperature stability and energy efficiency 316 stainless steel constructions resist chemicals. Calibration & Validation Technical Specification Capacity 15 bags Volume 20 liters Temperature 37 °C/4.0 °C Accuracy ± 0.2 °C Input Voltage 230 / 110V AC Suitable Fluids Distilled Water Cryoprecipitate Bath Micro controller based Cryoprecipitate Bath is designed to safely and reliably thaw fresh frozen Plasma (FFP) for the recovery of cryoprecipitated antihemophilic factor (AHF) Temperature set to 4 deg.C Salient Features:advanced Cryo Bath offer a combination of contemporary cabinet design, advanced micro - controller and a range of accessories to suit your specific laboratory or process application.High-strength cabinet construction with 304 stainless steel interior tanks withstands the most critical applications in demanding laboratory environments.temperature is controlled by specially designed micro-controller based temperature Controller with an accuracy of 0.2 °C thawing temperature is preset to 4 deg. C.Specially designed trays for the safety of the plasma bags. The unit is provided with a circulating pump to ensure uniform temperature The unit is mounted on castor wheels for ease of mobility.

Additional Information:

• Item Code: BB-12
• Minimum Order Quantity: 2 each

Refrigerator for reagents and blood samples. Capacity approx 400L. Type: Vertical with glass door. Temperature º4C +/- º0,5C. Accessories: Monitor for temperature with alarm visual and sound for high/low temperature, tropicalized. Auto defrosting. Adjustable shelves, Lockable. 100% HCFC/CFC free. 240V/ 50 - 60Hz. 2-3 drawers and shelves. Inner made of Stainless steel 304 grade and outer made of M.S. sheet of heavy gauge duly powder coated paint finish, unit moves on the wheel to move around

Additional Information:

• Item Code: BB-16
• Minimum Order Quantity: 2 each

Stationary Couch cum donor chair for stationary use For Blood donor rest area. Height approx.50 cm. Built for easy transportation, ie. light weight construction. frame made of steel construction duly powder coated paint finish, may be folding. able to carry 150kg weight. Length max 5-6 feet this is chair very comfortable back side of the chair is adjustable with mechanish, both the arms are removable and rotatable as well , easy to clean seat and back, stationary chair can be transport from one to another place

Additional Information:

• Item Code: BB-21
• Minimum Order Quantity: 5 each

Couch, donor for mobile sessions. frame made of steel round pipe duly powder coated finish. For donor rest area. Height approx.50 cm. Built for easy transportation , ie. Foldable and light weight construction. Collapsible. Able to carry 150 kg weight. Length max 5-6 feet this is folding donor chair easy to fold and easy to open as needed, comfortable seat, back and foot side, all the three parts are movable as per need of the user, steel construction, both the arms are foam padded arm rest allow full comfort to the patient while donating the blood. Seat back and foot section is covered with tetron fabric which is easily washable and enough sturdy to hold the weight of the patient

Additional Information:

• Item Code: BB-22
• Minimum Order Quantity: 10 each

Donor bed for use in a stationary setting For donor rest area. Height approx 50-80 cm. Built for easy transportation, ie. Foldable & light weight construction. Collapsible.  able to carry 150 kg weight. Length max 6 approx feet the Donour bed have both side arm rest which has height adjustment and can rotate at 360 degree as per need of the user, one side there is one tray for holding collection monitor or blood bag, head side of the bed is adjustable on desirable position with help of knob provided on the back side, uphostely duly made by semi leather type material  which is easy to clean, frame of the bed made of square pipe of M.S. duly powder coated paint finish.

Additional Information:

• Item Code: BB-23
• Minimum Order Quantity: 5 each

Rajas Blood Donation chair portable and folding type easy to carry for outdoor activity espically for Blood Donation camps and otheroutdoor activity.the chair can handle weight up to 220 kg construction of Aluminum pipe back of the chair is 50x70 cms and seat of the chair is 50x100 cms lenght of the chair is from 170 to 190 cms. the chair has mattress which can be removed with the thickness of 4-5 cms which is washable and easy to clean fabricated with semi leather material. the chair has provision to set two armrest which is removable and one head rest on head side. total weight of the chair is 10 to 15 kg.

Additional Information:

• Minimum Order Quantity: 10 each

Microprocessor controlled, designed for automatic separation of blood components from the blood bag. Automatic Control, Audiovisual Alarm, and provided with infra-Red Sensor. Clamping Motor activated, Mild steel cabinet, white powder coated able to withstand corrosion, wear & tear. The Acrylic Compression plate designed to exert uniform pressure on the blood bag. 230/110V AC.

Additional Information:

• Item Code: BB-14
• Minimum Order Quantity: 5 each

For transport of blood. Heavy duty, domestic type.  Approx. 60-70 cm x 40-45 cm x 42-46cm. Able to contain 20 blood bags and appropriate cold packs that can fit into its compartment.  Able to maintain +2 to +8 degree C for 12 hours. Have 2 handles to enable one or two persons to carry. Construction of PVC material easy to handle for outdoor activity, best A class insulatation for best result

Additional Information:

• Item Code: BB-17
• Minimum Order Quantity: 10 each

Donor bed cum chair for mobile blood collection. For donor rest area. Height approx. 50 cm. Built for easy transportation, Foldable and light weight construction of round pipe of Stainless Steel. Collapsible. able to carry 150 kg weight. Length max 5-6 feet this is chair cum couch easy to fold and easy to open as couch, foam padded seat, back and foot side, all the three parts are movable as per need of the user, stainless steel construction, both the arms are removable as per user need, arm are rotatable as well on 360 degree, foam padded arm rest allow full comfort to the patient while donating the blood. The couch allow Trendelenburg position and reverse Trendelenburg position

Additional Information:

• Item Code: BB-20
• Minimum Order Quantity: 5 each

Tube Sealer Hand held: for sealing PVC- blood bag tubings. Simple manual operated model made of stanelss steel PVC coating on the both side levers which allow easy grip and smooth operation of the sealer, easy to clean and very light weight unit to carry for out door activity,

Additional Information:

• Item Code: BB-18
• Minimum Order Quantity: 15 Piece